Watch: How to test your outlet.

Earthing products ground the body through the ground connection in your homes electrical outlets (the round third hole on the outlet). Its important to ensure that the outlet you're using has a proper ground connection before plugging in your product. always double-check before you start using your Earthing product, as well as every time you switch to a new or different outlet. This simple step can help you make the most of your Earthing experience.

How to check if your outlet is properly grounded

Every Earthing Kit comes with an outlet checker. It has a three prong connector on the back and three lights on the front. Plug it into the oulet you want to use with your grounding product.

Two amber lights mean the outlet is properly grounded and will work with your Earthing product. Any other combination of lights means the outlet is not properly grounded and an electrician should be contacted to fix the issue.

If no properly grounded outlets are available then an Earthing Ground Rod can be purchased HERE. The ground rod will ground your product by connecting directly to the earth outside.

Every Earthing Kit comes with a Saftey Adapter. It is a white cube with two platic prongs and one metal prong. The Saftey Adapter is designed to connect to the ground of the outlet only. It also allows two earthing cords to be used in a single outlet, allowing you to connect more earthing products while saving space.

Plug your safety adapter into the outlet you just tested with the outlet checker. Then plug the eathing cords into the saftey adapter. Your cords are ready to connect to your earthing products!

Watch a video on how to set up your Mattress Cover

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

First, Take note of the location of the snap on the mattress cover, position this at the head of the mattress so the cord is not exposed once setup is complete.

With the black side facing up, secure the mattress cover by looping the straps around the corners of your matress.

Once the Mattress Cover is secure, connect your coil cord to the snap on the mattress cover. Your product is now grounded and ready for use.

Note: The mattress cover can be placed under a thin sheet (Thicker material like flannel is not recommended as this can disrupt the ground connection). Or you can place the mattress cover on top of your sheets and sleep directly on the mat.

Care instructions: Our conductive black carbon material is inherently antimicrobial and can be wiped down with a damp cloth. For an occasional deeper clean, wipe down your product using a damp cloth mixed with a small amount of mild household soap. Use a clean, damp cloth to thoroughly wipe away the soap. This prevents buildup, which blocks conductivity. Let your product air dry. Important: Never use a cleaning agent containing bleach, disinfectants, oils, or whitening agents, as they can ruin the conductivity of your Earthing® product. Never put your product in the washing machine.

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

To set up the Earthing Sleep Mat, place it vertically or horizontally on your mattress. Secure the Sleep Mat by looping the straps under your mattress.

Note: The Sleep Mat can be placed under a thin sheet (Thicker material like flannel is not recommended as this can disrupt the ground connection). You can also place the sleep mat on top of your sheets and sleep directly on the mat.

For an enhanced grounding experience check out our Earthing® sheets and pillow cases designed to be used with the Earthing Pillow Cover, Earthing Sleep Mat and Earthing Mattress cover.

Using the Earthing Product Tester with your Sedona Shoes

Our new Sedona's have a conductive strip that transmits the negative electrons from the earth to your foot.

In order to make the Sedona more comfortable we added carbon cushioning. Because of this cushioning, it can take about 15 to 20min until the moisture from your foot has connected with the grounding strip and appears green on a tester.

Please note, that the Earthing Product Tester was designed specifically to test our indoor mats, and is not calibrated to accurately test the Sedona Earthing shoes.

Watch: Setting up your Earthing Pillow Cover

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

Unzip the pillow cover and put your favorite pillow inside similar to a pillow case. Locate the snap near the zipper and connect your coil cord to the snap. Zip up the pillow cover and its ready to use!

Note: The Pillow Cover can be used with a pillow case or you can sleep directly on the pillow cover.

For and enhanced grounding experience check out our Earthing® sheets and pillow cases designed to be used with the Earthing Pillow Cover and Earthing Mattress cover.

Watch: Set and and use the Earthing® Universal Mat

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

The Universal Mat, is just that, universal! So get creative on how to use it! It works great on top of your desk or on your favorite chair. Roll it up and take it with you wherever you go! You never have to miss a day of grounding with the Universale Mat!

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

Our Earthing Sheets and Pillow case are designed to be used with our Matress Cover and Pillow Cover. Follow those directions to make sure they are set up correctly.

Once your Matrress Cover and Pillow cover are set up, put the Earthing sheets on your bed like any normal sheet set. These do not require coil cords because they are grounded through contact with the Mattress/Pillow covers.

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

The Earthing Throw is a great way to get grounded and relax. attach the coil cord to the snap on the black tab of the Throw and connect the other end of the cord to your Safety Adapter. Cover yourself with the Throw (cream side down).

Machine Wash regularly with gentle detergent,

NEVER use bleach on grounding products, this could disrupt the conductivity.

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

These patches are meant to be apply to any acute pain spot for targeted relief. The patches are adhesive and are meant for one-time use, although there may be enough adhesive remaining on the patch to accommodate several applications. These patches can be left on for 24 hours.

Apply to any part of the body for targeted relief, or apply to the palms of the hands or bottom of the feet as these are the most conductive points on the body.

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

Snap the Coil Cord onto the connection tab of the Earthing® Chair Mat.
Place the Chair Mat on your seat or couch with the blue side facing down.

The Auto Seat Mat connects you to the metal frame of your vehicle using the Auto Coil Cord. While this does not create a true earth ground, it pulls static electricity off your body that accumulates as you drive.

Find an area under your seat where there is bare metal (paint will not allow a proper connection) Get a firm grip on the metal with the alligator clip then connect the other end of the cord to the snap on the mat.

Place it in the center of your seat and enjoy!

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

Place the Floor Mat in the desired location with the smooth side up. Attach the Cord to the snap on the mat and enjoy!

Wait! Have you completed the steps in the "Getting Started" section? If so, then lets continue.

1. Connect the ground cord to the yoga mat via magnetic snap: Locate the corresponding magnetic snap on the mat next to the earthing logo and align it with the end of the ground cord and ensure a proper alignment. This connection enables the grounding properties of the mat to flow through the ground cord.
2. Ensure the smooth black side with the foot icon is face up and in contact with your bare feet during use.

1. Check your wall outlet with an Outlet Checker (not included) to ensure you have a grounded outlet. Next, plug the Safety Adapter (included with this kit) into your grounded wall outlet.

2. Snap Coil Cord #1 onto the Product Tester. Plug the other end of cord into the Safety Adapter.

3. Connect your grounding product as instructed and plug into the other socket of the safety adapter. 

4.4. Place the Product Tester firmly onto the conductive surface of your Earthing or Ground Therapy product. Press down on to the PRESS button and a solid green light in the indicator window shows that your product is conductive and ready to ground you.

1. Push the Ground Rod into the moist soil outside your open window or door. It's okay if it's not flush with the ground, it will still conduct perfectly well.
2. Put the cord of the Ground Rod through the open window or door, and then go outside.
3. Close the window or door. It won't damage the cord.
4. The end of the cord has an opening on it.
5. If you'd like to connect TWO Earthing products, push the U.S. Safety Adapter into the end of the cord. Then, push the end of each Earthing Coil Cord into each Safety Adapter hole. 
6. If you'd like to connect ONE Earthing product, push the end of the Earthing Coil Cord directly into the Ground Rod cord.
7. Snap the end of the Coil Cord(s) on the Earthing product and you're ready to use it!